Controlling risks

Once you've completed a risk assessment in your workplace, those risks that you have identified as high or moderate may require additional controls. You must correct unsafe conditions.

The highest risk should be addressed first. If you cannot eliminate a risk, you’ll need to implement control measures to minimize the risk. The hierarchy of controls can help you systematically take action to minimize risk.

The hierarchy of controls

When considering how to reduce the risk, there's a certain order you should follow. This is called the hierarchy of controls. It's important to follow the hierarchy, as shown below, rather than start with the easiest control measures.

Note that while the controls are listed in order of effectiveness, all four types of controls should be considered. They often work best in combination. For example, first responders cannot eliminate risks by choosing not to enter a burning building, but they can use engineering controls, administrative controls, and personal protective equipment and clothing to minimize the risks when they enter that building.

Diagram showing the hierarchy of controls

  1. 1

    Elimination or substitution

    Eliminating the hazard completely is always the first choice. Substitution involves replacing the material or process with a less hazardous one.

    When considering these options, ask yourself:

    • Can I find safer ways to perform the task? For example, if falling is a hazard, eliminate the risk by storing stock at lower heights so workers don't have to climb ladders to reach the goods.
    • Can I use something less harmful? For example, if chemical-heavy industrial cleaners are a hazard, consider substituting cleaners made with vinegar, salt, borax, or baking soda. Just make sure the substitutions don't create new hazards.
  2. 2

    Engineering controls

    If you can't eliminate the hazards or substitute safer alternatives, engineering controls are the next best options. These involve using work equipment or other means to prevent workers from being exposed to a hazard. Engineering controls are physical changes to the workplace and may include equipment guarding, guardrails, traffic control lanes and barriers between vehicles and pedestrians, and many other options.

    For example, while working at heights cannot be avoided in construction, guardrails can be installed to prevent falls from happening. Guardrails are an example of an engineering control.

  3. 3

    Administrative controls

    Administrative controls involve identifying and implementing safe work procedures so your workers can perform their job duties safely. The findings of your risk assessment will form the basis of these safe work procedures.

    Examples of administrative controls include implementing person-check procedures and prohibiting the use of mobile phones while workers are driving.

  4. 4

    Personal protective equipment and clothing

    Using personal protective equipment (PPE) is another important control to protect workers.

    For example, while working with toxic chemicals may be necessary in certain workplaces such as laboratories, the use of PPE such as protective eyewear and gloves will help to reduce the exposure risk.


Control measures don’t have to be costly, but the potential return on investment is huge. For example, placing a mirror on a dangerous, blind corner of your worksite can help prevent vehicle incidents. Considering how serious a resulting injury might be, this is a low-cost precaution.

Monitoring control measures

Protecting workers from harm requires ongoing effort. You’ll need to monitor the effectiveness of the hazard controls in place and improve those that don’t measure up. Ways to monitor effectiveness include your regular safety inspections, supervisory walk-throughs, and your joint health and safety committee meetings. Review your risk assessments at least once a year, and whenever you introduce new equipment, materials, or work processes.

Be sure to keep clear documentation of your risk assessment and the control measures you put in place. This documentation can help you monitor when your control measures need to be modified. It is also an important step in showing due diligence.

A customizable template and guide are available to assist in risk assessment and record keeping.